| Product Name: |
Pro-Wall plasterboard and spray skim plaster, primer, sealer surfacer, finish coat |
| Description: |
Pro-Wall has been designed to prime, seal & surface new
Plasterboard (Drywall), and to protect spray applied projection
Skim plasters. Pro-Wall ensures that the surface of the
Drywall will be uniform. The porosity of the substrate will be
Equalised for a uniform finish. Can be left as a topcoat if required.
However If tinted to the same colour as the specified topcoat only
a mist coat of the specified topcoat will be required. |
| Where to use: |
Plasterboard, spray skim plaster, concrete and plaster |
|
| Properties: |
- Seals, Surfaces & Primes Drywall & Spray Plaster
- Water-based
- Uniforms & equalises porosity of substrate
- Excellent productivity
- Can be left as a finish coat on ceilings & walls
- Durability
- Wipeable with damp cloth
- Material costs as low as £0.40pm2
|
Specification |
| Preparation: |
For spraying over taped & jointed plasterboard as a finish: ensure
the plasterboard has been taped & jointed to a level finish. (3 box)
Fill any imperfections. Sand to a smooth finish, remove all surface
dust. Mask and protect areas not to be sprayed.
For application over spray skim, plaster & concrete: ensure all
areas are sanded flat, fill any imperfections, remove all surface
dust, mask and protect areas not to be sprayed.
|
| Application: |
Do not dilute. Product is ready for application by airless spray.
Apply Pro-Wall onto substrate.
Use Airless Spray with tip size .015 to .019 with 12 inch fan
Apply Pro-Wall in a cross hatch method. 1st pass vertically
2nd pass horizontally for uniform coverage.
|
| Completion: |
Clean machine and equipment with warm water, clean area ready
for re-occupation. Pro-Wall can be left as finish coat on
ceilings & walls but can be overcoated if required. |
Technical Data |
| Colour: |
White as standard but can be supplied in any RAL or BS colour |
| Solids: |
60% |
| Spread rate: |
6m2 per litre depending on WFT Required |
| Dry to touch: |
45 minutes |
| Recoat: |
After 2 hours |
| Clean-up: |
Warm, soapy water |
| Flash point: |
100° C |
| WFT: |
Between 150 & 500 microns |
| Containers: |
20 litres |
| Container weight: |
26kg |
